Influence of pyrolysis temperature and heating rate on the production of bio-oil and char from safflower seed by pyrolysis, using a well-swept fixed-bed reactor

Abstract

In this study, fast pyrolysis of safflower seed (Carthamus tinctorius L.) was investigated with the aim to study the product distribution and their chemical compositions and to identify optimum process conditions for maximizing the bio-oil yield. Experiments were performed in a well-swept resistively heated fixed-bed reactor under nitrogen atmosphere. The maximum oil yield of 54% was obtained at the final pyrolysis temperature of 600°C, sweeping gas flow rate of 100 cm3 min−1 and heating rate of 300 °C min−1 in a fixed-bed reactor. The elemental analysis and calorific value of the bio-oil were determined and compared with diesel fuel and then the chemical composition of the bio-oil was investigated using chromatographic and spectroscopic techniques (IR, GC/MS, simulated distillation). The char was characterized by elemental, BET surface area and SEM analyses.