Abstract
Decolorization of an organic dye by discharge in high conductive water using a pulsed power generator and a discharge reactor was investigated. The discharge reactor consisted of a glass tube and a tungsten wire inserted into the glass tube, which was immersed in the water. Room air was injected into the glass tube to generate bubbles in the water. High voltage pulses were generated by an inductive-energy storage system using semiconductor opening switch (SOS) and by a magnetic pulse compression circuit. Fast recovery diodes were used as SOS diode in the inductive-energy storage system. The pulse width was changed in range from 10 to 1200 ns. The high voltage was applied to the tungsten wire. Indigo carmine was employed as a specimen to evaluate decolorization efficiency. Potassium nitrate was used to adjust the solution conductivity. The dye solution was successfully decolorized at 7 mS/cm conductivity. Energy efficiency for decolorization increased from 0.680 to 55.6 mg/Wh with decreasing the pulse width from 1200 to 10 ns owing to the reduction of ohmic loss.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
