Influence of process parameters on surface plasmon resonance characteristics of densely packed gold nanoparticle films grown by pulsed laser deposition

Abstract

The optical responses of gold nanoparticle films and thin continuous films grown by pulsed laser deposition (PLD) in a wide range of process parameters were studied. The growth conditions for obtaining strong surface plasmon resonances (SPR) were optimized. Laser fluence and substrate temperature were found to play key roles in the SPR characteristics of the grown films. The SPR wavelength was tuned in the range of 580–720nm by varying number of pulses and target-to-substrate distance during the PLD. Atomic force microscopic analysis revealed that the size of metal nanoparticles systematically increased with increasing number of pulses and decreasing target-to-substrate distance. Morphology of the films, which exhibited strong SPR showed densely packed spheroid nanoparticles of gold. Theoretical calculations of SPR wavelengths for the presently studied densely packed gold nanoparticle films were carried out using modified Yamaguchi model which incorporate particle–substrate and particle–particle interactions. From these calculations it was found that the observed SPR responses and their tuning arise from the combination of high volume filling fraction and aspect ratios of the gold nanoparticles.