Abstract
A CuFe2 alloy in solution treatment and in age hardenable states was processed by rolling with cyclic movement of rolls (RCMR) in order to investigate the influence of the precipitates on grain refinement. After applying two different aging treatments, various populations of second phase Fe particles were obtained: coherent with particle diameter and interparticle distance of about 10nm and 40nm, respectively, and not coherent with particle size and interparticle distance of about 100nm and 200nm, respectively. The resulting deformed structures were analyzed using light microscopy (LM), high resolution electron backscattered diffraction (EBSD) system coupled to a scanning electron microscope (SEM) and scanning transmission electron microscopy (STEM). Moreover, a microtensile test was performed on the deformed material. It was found that the presence of second phase particles has a significant effect on the formation of ultrafine grain (UFG) structure during the RCMR deformation. The presence of grains/subgrains with a high internal dislocation density and with non-equilibrium grain boundaries is the typical feature of the microstructure with a high- density of coherent Fe particles in the matrix. A closer inspection of the microstructure reveals the development of deformation twins and microshear bands.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.