Abstract
This work focuses on the synthesize of nanostructured (Fe65Co35)100-x (Pr6O11)x (x = 0, 5) powders using high energy ball milling. The influence of Pr6O11 on structural, morphological and magnetic properties of Fe65Co35 nanoparticles were carried out by X-ray diffraction (XRD), scanning electron microscopy (SEM) with a dispersive energy analyzer (EDS), vibratory sample magnetometer (VSM) and differential scanning calorimetry (DSC). Results show that the praseodymium oxide addition increased the decrement rate of the crystallite size with milling time of about 27 % and decreased the increment rate of the internal micro-strain of 50 %. Moreover, because of its high grain fragmentation tendency, Pr6O11 increases the hardness and brittleness of Fe-Co powders. Moreover, it minimized the cold welding between Fe-Co ductile particles leading to a significant decrease in the average particle size (~1µm). The magnetic measurements conducted at room temperature show that the saturation magnetisation (Ms) and the coercivity (Hc) increased with milling time in both compositions. A low Ms and high Hc values were detected in (Fe65Co35)95 (Pr6O11)5 nanoparticles. The results demonstrated a soft ferromagnetic nature in all of the synthesized nanoparticles with Ms in the range 207 – 216 emu/g and Hc is found to be 113 Oe.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
