Influence of Plastination on Ultrasound Transmission Through the Human Skull.

Abstract

Development, optimization and validation of transcranial ultrasound methods require the use of fresh human or animal skulls. However, to avoid fresh skull degradation over time, fixation methods are required for conservation, such as formaldehyde buffer solution. This method allows for conservation of the skull properties over a relatively long period, but requires specific conditioning (de-gassing) and storage conditions, such that its practical use is limited. Plastination appears to be a unique solution for the preservation and transportation of body parts without constraints. However, the influence of this conservation process has yet to be characterized with respect to ultrasound transmission to verify that the acoustic and mechanical properties of the skulls are not altered by the plastination process. The objective of the study described here was to quantify the effect of plastination on ultrasound transmission through the temporal and parietal areas of the human skull between 200 kHz and 2 MHz. To achieve this, transmission measurements were performed on three different skulls and four areas before and after plastination. It was found that the plastination process results in a transmission loss of 5 dB. Moreover, results indicate that the plastination process does not induce any phase shift in the transmitted signal, validating the proper use of plastinated skulls for in vitro measurements and development of new transcranial ultrasound methods.