Abstract

The influence of residual plastic deformation on the bending deformation of a magnetoactive elastomer (MAE) beam with non-coercive superparamagnetic manganite (La0.6Ag0.2Mn1.2O3) nanoparticles induced by a transverse uniform magnetic field has been studied. It was found that the MAE bending induced by the magnetic field switching-on/switching-off is mainly cyclic elastic. Plastic deformation leads to the emergence of residual bending and hysteresis in the field dependence of the bending. It was shown that the residual bending that appears after the first magnetic field switch-on eliminates the uncertainty of the bending direction at the next magnetization. Due to the residual plastic deformation, the bending direction of the superparamagnetic MAE with nanoparticles does not change when the direction of the applied magnetic field is inverted, in contrast to the MAE with microparticles where the uncertainty of the bending direction is eliminated due to the residual magnetization of weakly coercive ferromagnetic microparticles; therefore, the bending direction changes its sign with magnetic field reversion. In the low fields, the bending value for the MAEs with superparamagnetic particles is proportional to the square of the magnetic field strength. Model estimates on the residual deformation influence on the beam bending at beam magnetization reversal were obtained.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call