Abstract
Magnesium and its alloys are extensively used in the defence, aerospace and automotive industries, owing to their excellent mechanical properties. But there is a requirement of corrosion prevention treatment before using it for applications, since the corrosion resistance of Mg alloy is poor. In this work, a study on the mechanical properties of friction stir welded ZE41 rare earth magnesium alloy thick plates of 15 mm and 25 mm, was carried out. A metallographic examination and mechanical tests were conducted on both the welds. Furthermore, Plasma Electrolytic Oxidation (PEO), a surface conversion treatment was carried out on both the base material as well as on the friction stir butt joints. X-Ray diffraction and scanning electron microscopy analysis were carried out on all the samples, with and without coating. The coated and uncoated samples were assessed by potentiodynamic polarisation (PDP) tests and electrochemical impedance spectroscopy (EIS) to study the electrochemical corrosion behaviour. An outer porous layer and an inner dense layer, have been identified from the SEM images. From the corrosion tests results it was revealed that there was an improvement in the corrosion resistance of both the base metal as well as the weldments by the PEO coating process.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
