Influence of Particle Size on the Basic and Time-Dependent Rheological Behaviors of Cemented Paste Backfill

Abstract

The rheological properties of cemented paste backfill (CPB) significantly influence the material’s transportability, and these properties are strongly affected by the material’s particle size. This paper mainly focuses on the influence of particles size on the basic and time-dependent rheological behaviors of CPB. The rheology tests and microstructure analysis were conducted using multiple CPB samples with different solid contents, cement contents, and particle sizes. Results show that the CPB samples with finer particle sizes have a lower apparent maximum packing density compared to the CPB samples with larger particle sizes. Fresh CPB mixture samples exhibit shear thinning characteristics which are more pronounced in samples with larger particle sizes and higher volume fraction to apparent maximum packing density ( $$\phi /\phi_{\text{m}}$$ ) ratios. When the $$\phi /\phi_{\text{m}}$$ ratio is lower than 0.875, the samples with finer particle sizes display a higher yield stress but less time-dependent rheological behavior than coarser samples. In all CPB samples that contained cement, the shear stress decreases first and then increases over the shearing time when samples are sheared at a constant shear rate. In the CPB samples without cement, samples with finer particle sizes show lower apparent viscosities, and it is observed in the sample with the finest particles that the shear stress only decreases over the shearing time. Moreover, it is found that the number of hydration products and the rate of particle sedimentation are both higher in samples with larger particle sizes, which result in these samples having higher apparent viscosities.