Influence of Offset on Hemodynamics of Intra-atrial Conduit Fontan's Procedure and Its Clinical Implications.

Abstract

The desirable distance, defined as offset, between the central line of the superior vena cava (SVC) and the intra-atrial conduit after an intra-atrial conduit (IAC) Fontan's procedure remained unclear. We compared the hemodynamic features using virtual surgery with different offset designs in our study. Three-dimensional models of IAC Fontan's procedure were reconstructed according to the magnetic resonance imagings (MRIs) of three patients, then four models for each patient with different offsets equaling 100, 67, 33, and 0% of the diameter of the IVC were reconstructed. Computational fluid dynamics (CFD) were performed in each model to predict the best hemodynamic features, including streamlines of blood flow, wall shear stress (WSS), energy loss (EL), and the hepatic flow distribution (HFD) ratio. Comprehensive evaluation of WSS, EL, and HFD revealed than an offset of 33% presents the best hemodynamic performance among the three patients modeled. In patient A, an offset of 33% resulted in the best HFD (left pulmonary artery/right pulmonary artery [LPA/RPA] = 35/65%). In patient B, the best trade-off between HFD (35/65%), and WSS was achieved with an offset of 33%. In patient C, EL peaked at an offset of 0% and significantly dropped at an offset of 33% with a desirable HFD (60/40%). We verified that the offset distance influences hemodynamic performance in IAC Fontan's procedure. Considering several hemodynamic parameters, the best trade-offs between hemorheology, pulmonary perfusion, and energy efficiency were achieved at an offset of 33%. This distance should be taken into consideration and optimized during the surgical planning for the IAC Fontan's procedure.