Influence of novel surface modifying macromolecules and coagulation media on the gas permeation properties of different polymeric gas separation membranes

Abstract

AbstractIntegrally skinned asymmetric membranes for the separation of O2 and N2 were fabricated by the phase inversion technique from polysulfone, polyetherimide, and polyimide. Two types of surface modifying macromolecules (SMMs) including hydrophilic SMM (LSMM) and charged SMM (cSMM) were synthesized and blended with the casting solution to modify the membrane surface. The cast film was then immersed in the first coagulant alcohol (methanol, ethanol, or isopropanol) for a predetermined period, before being immersed in the second coagulant (water). The SMMs used in these experiments were laboratory synthesized by the two‐step process of polyurethane prepolymer synthesis and end capping, before being characterized by differential scanning calorimetry. Their molecular structure was determined from the molecular weight obtained by gel permeation chromatography. The membranes were characterized by contact angle measurement and O2 and N2 gas permeation performance. Attempts were made to interpret the gas permeation data by delayed demixing affected by solubility parameters of polymer, solvent, and nonsolvent. Furthermore, the permeation performance of cSMM membranes was interpreted by the solvation of the charged sulfonate groups present in cSMM. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012