Abstract
The proper designs of modified heat transfer surfaces or turbulence enhancement inserts for heat transfer augmentation are extremely important for improving overall aerothermal performances relating to the energy-saving capabilities of thermal systems. A major challenge is to control friction loss as little as possible while maintaining reasonable heat transfer enhancement. Transverse baffles with rectangular notches or notched baffles (NBs) were applied for improving aerothermal performance in a channel with a constant aspect ratio of 3.75 while notch height-to-baffle height ratio (a/e) ranged from 0.125 to 0.5. Reynolds number ranged from 6000 to 24,000, in experiments. Heat transfer enhancement, pressure loss, and aerothermal performance in a rectangular channel with notched baffles were examined. Compared to the solid transverse baffle (SB, a/e = 0), the NBs with a/e = 0.125 increased the heat transfer rate while lessening the pressure loss, as shown by the experimental findings. Obviously, Nusselt number, friction factor and aerothermal performance increased as the a/e ratio decreased. The NBs with the smallest notch height-to-baffle height ratio (a/e = 0.125) exhibited the highest aerothermal performance of 1.17, which can be attributed to the efficient heat transfer enhancement by the strong multi-jet impingements and the moderate friction loss penalty resulting from the presence of notches (spaces) on the baffles.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.