Abstract
When the outdoor PM2.5 pollution is severe, if the windows are open, the occupants tend to be exposed to higher indoor PM2.5 of outdoor origin. However, if the windows are closed, the ventilation rate tends to be insufficient for removing air pollutants generated indoors. Opening windows with the use of nanofiber window screens can be an alternative strategy that can balance between indoor PM2.5 of outdoor origin and ventilation rate. This study fabricated a number of nanofiber window screens and conducted a series of experiments in a laboratory setup to measure the PM2.5 removal efficiency and pressure drop with different window opening angles. A simple model was then developed for predicting the pressure drop, and the measured data was used to validate the model. Finally, the measured data and the validated model were used for two application cases. In the natural ventilation case, the use of nanofiber window screens can effectively reduce indoor PM2.5 of outdoor origin, and the ventilation rate can be improved when compared with infiltration in the house. However, the nanofiber window screens could not reduce the PM2.5 level in the kitchen with a range hood when the cooking PM2.5 emission rate was high.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.