Abstract
Considering the strong dependence of agglomerate characteristics on various operating parameters, this study employs the control variable methodology (CVM) and response surface methodology (RSM) to investigate the influence of multi-factor interactions on particle growth during top-spray fluidized bed agglomeration. First, CVM is conducted to assess the effects of individual operating parameters on the agglomerate properties, such as mean particle size, relative width, and sphericity. Then, the interactive relationship between these input variables and the quality attributes of the process is investigated using RSM. The results show that the mean particle size increases with the increase of binder viscosity and spray rate, while it decreases with the increase of fluidization gas velocity and inlet gas temperature. The relative width of the particle size distribution increases with the spray rate, binder viscosity, and fluidization gas velocity, and hardly changes with the inlet gas temperature. The mean particle size is more sensitive to the binder spray rate at a lower level of fluidization gas velocity or a higher level of inlet gas temperature. The fluidization gas velocity corresponding to the maximum D50 changes when the binder viscosity and binder spray rate are at different levels.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.