Abstract
The microstructure in the heat affected zone of the multi-pass welds constructed using the 9% Cr tempered martensitic steels is complex and susceptible to premature creep failure. In the present research, a systematic investigation has been conducted after long-term creep exposure in the heat affected zone of a multi-pass weld on the 9% Cr Grade 92 steel to identify the sub-optimal microstructures with a high susceptibility to creep cavitation. The characterisation techniques employed include hardness mapping and a range of electron-based microscopy methods. The results provide quantitative data for microstructure and creep cavities. In this case, preferential creep cavitation has been confirmed in the regions within the heat affected zone that possesses a microstructure with an inhomogeneous distribution of the M23C6 carbides and a refined martensitic grain structure. Creep cavities have been observed on the secondary phase particles including the Al2O3, the MnS and the BN phases. The observations from the current research confirm that creep cavitation preferentially occurs in the partially-transformed zones that were subjected to thermal cycles associated with peak temperatures between the Ac1 and the Ac3 transus temperatures during weld fabrication.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.