Abstract
The viscosity of SiO2−CaO−MgO−Al2O3−TiO2−FeO blast furnace (BF) slag system with high Al2O3 content is studied by using a rotating cylinder viscometer. The effect of the MgO/Al2O3 ratio on the viscosity, the stability, and break point temperature of BF slag are investigated. As a result, an increase in the Al2O3 content and a decrease of temperature tended to make the stability of slag become worse gradually due to an increase in the degree of the polymerization of the slag. In addition, increasing Al2O3 content results in an increase in viscosity at a fixed temperature. The MgO/Al2O3 ratio of the slag have obvious effect on the influence of the temperature of the BF slag on viscosity of the slag; the proper use of the MgO/Al2O3 ratio can obviously improve the stability and the fluidity of the slag, and the suitable value of the MgO/Al2O3 ratio decrease with increasing the Al2O3 content in the BF slag. In order to maintain a good stability and fluidity of the slag, the Al2O3 content in the slag should be 18&#x0025 not exceed 19&#x0025 and the ration of MgO/Al2O3 in a range of 0.6–0.7.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
