Abstract
An experiment was conducted to investigate the effects of methane content in natural gas on combustion and performance of a liquefied natural gas (LNG) heavy-duty engine. Two kinds of LNG with different methane contents (i.e. 93% and 99%), in combination with three compression ratios (i.e. CR11.6, CR14 and CR16) and varied spark timings were tested and compared at various engine speeds. The results show that natural gas with 99% methane content has better actual antiknock performance than the one with 93% methane content, and subsequent better power performance and fuel economy. When compression ratio is increased from 11.6 to 14, natural gas with 99% methane content can maintain the maximum loads at all tested speeds, and achieve a maximum decrease of 6.4% in BSFC. On the contrary, the maximum load at high-speed is limited for natural gas with 93% methane content due to knocking combustion. Moreover, natural gas with 99% methane content has larger knock-limited spark advanced angle compared to the one with 93% methane content, so it achieves earlier ignition and then lower BSFC. In conclusion, higher methane content has better comprehensive performance than the lower one in natural gas engines with high compression ratio.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
