Influence of MA‐g‐HDPE compatibilizer content on quality and adhesion/bending strength of polyethylene/O‐MMT coating films

Abstract

ABSTRACTHigh density polyethylene/organo‐modified montmorillonite composites whit various concentrations of maleic anhydride grafted high density polyethylene (MA‐g‐HDPE) as compatibilizer (5–20 wt %) have been prepared by melt process. The extruded composite powders are applied on the treated steel surfaces using spray electrostatic powder technique, followed by oven curing at various temperatures (180°C–220°C) and times (15–45 min). The surface uniformity of produced coating films is studied by scanning electron microscopy. Comparison of micrographs of the coatings shows the composite coating films are measured using standard methods. The uniformity, adhesion, and bending strength of the coating films are compared to select high performance coatings. The results indicate that the presence of 15 wt % MA‐g‐HDPE in the coatings shows the highest properties (adhesion and bending strength) and more surface uniformity. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014, 131, 40926.