Abstract
In this paper, we experimentally investigate the influence of storage at 40 °C on the shape memory performance and mechanical behavior of a pre-stretched commercial poly(methyl methacrylate) (PMMA). This is to simulate the scenario in many applications. Although this is a very important topic in engineering practice, it has rarely been touched upon so far. The shape memory performance is characterized in terms of the shape fixity ratio (after up to one year of storage) and shape recovery ratio (upon heating to previous programming temperature). Programming in the mode of uniaxial tension is carried out at a temperature within the glass transition range to one of four prescribed programming strains (namely 10%, 20%, 40% and 80%). Also investigated is the residual strain after heating for shape recovery. The characterization of the mechanical behavior of programmed samples after storage for up to three months is via cyclic uniaxial tensile test. It is concluded that from an engineering application point view, for this particular PMMA, programming should be done at higher temperatures (i.e., above its Tg of 110 °C) in order to not only achieve reliable and better shape memory performance, but also minimize the influence of storage on the shape memory performance and mechanical behavior of the programmed material. This finding provides a useful guide for engineering applications of shape memory polymers, in particular based on the multiple-shape memory effect, temperature memory effect, and/or low temperature programming.
Highlights
The shape memory effect (SME) refers to the ability of a material to return its original shape, but only at the presence of a right stimulus, such as heat, chemical or light, etc. [1,2,3,4,5]
After the above-mentioned cooling back to room temperature and unloading, the samples were stored at 40 ◦ C for a required period of time to simulate the real scenario in many engineering applications, the free-standing material may go through relaxation over the period of storage
Besides programming temperature and programming strain, which have been identified to have strong influence on the shape memory performance of polymeric materials [17], storage time is an additional parameter in the current study
Summary
The shape memory effect (SME) refers to the ability of a material to return its original shape, but only at the presence of a right stimulus, such as heat, chemical or light, etc. [1,2,3,4,5]. Polymers 2019, 11, 1978 engineering application point of view, such as in active disassembly [31,32], deployable structures [33] and anti-counterfeit applications [34,35,36,37,38,39,40], of theout. The C shape memory and mechanical behavior of abehavior commercial on the shapeperformance memory performance and mechanical of apoly(methyl commercial methacrylate) poly(methyl (PMMA), which is a typical engineering polymer, used in many applications, optical lens methacrylate). 20 years [49,50] Both experimental investigation simulation the SME (without chemical cross-linking, via physicalbut cross-linking) have been well documented of amorphous polymers (without chemicalbut cross-linking, via physical cross-linking) have been in the literature in (e.g., in [41,51,52,53]).
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
