Abstract

We consider a smooth, spanwise-uniform forward-facing step defined by a Gauss error function of height 4 %–30 % and four times the width of the local boundary layer thickness $\unicode[STIX]{x1D6FF}_{99}$. The boundary layer flow over a smooth forward-facing stepped plate is studied with particular emphasis on stabilisation and destabilisation of the two-dimensional Tollmien–Schlichting (TS) waves and subsequently on three-dimensional disturbances at transition. The interaction between TS waves at a range of frequencies and a base flow over a single or two forward-facing smooth steps is conducted by linear analysis. The results indicate that for a TS wave with a frequency ${\mathcal{F}}\in [140,160]$ (${\mathcal{F}}=\unicode[STIX]{x1D714}\unicode[STIX]{x1D708}/U_{\infty }^{2}\times 10^{6}$, where $\unicode[STIX]{x1D714}$ and $U_{\infty }$ denote the perturbation angle frequency and free-stream velocity magnitude, respectively, and $\unicode[STIX]{x1D708}$ denotes kinematic viscosity), the amplitude of the TS wave is attenuated in the unstable regime of the neutral stability curve corresponding to a flat plate boundary layer. Furthermore, it is observed that two smooth forward-facing steps lead to a more acute reduction of the amplitude of the TS wave. When the height of a step is increased to more than 20 % of the local boundary layer thickness for a fixed width parameter, the TS wave is amplified, and thereby a destabilisation effect is introduced. Therefore, the stabilisation or destabilisation effect of a smooth step is typically dependent on its shape parameters. To validate the results of the linear stability analysis, where a TS wave is damped by the forward-facing smooth steps direct numerical simulation (DNS) is performed. The results of the DNS correlate favourably with the linear analysis and show that for the investigated frequency of the TS wave, the K-type transition process is altered whereas the onset of the H-type transition is delayed. The results of the DNS suggest that for the perturbation with the non-dimensional frequency parameter ${\mathcal{F}}=150$ and in the absence of other external perturbations, two forward-facing smooth steps of height 5 % and 12 % of the boundary layer thickness delayed the H-type transition scenario and completely suppressed for the K-type transition. By considering Gaussian white noise with both fixed and random phase shifts, it is demonstrated by DNS that transition is postponed in time and space by two forward-facing smooth steps.

Highlights

  • Based on the results presented in figure 17(a), we observe that the spanwise modulation induced by mode (0,1) with energy decaying on the smooth steps leads to stabilisation of the boundary layer

  • direct numerical simulation (DNS) of various transition situations are undertaken for frequencies 140 < F < 160 forcing cases to confirm the results from the linear analysis

  • For h 20 % destabilisation was generally observed, when considering a smooth step γ < 1 it appears to have a weaker destabilising effect than previous papers that have reported of sharp-step configurations where γ = 1

Read more

Summary

Motivation behind the study of steps in boundary layers

In environments with low levels of disturbances, transition to turbulence is initiated by the exponential amplification of the Tollmien–Schlichting (TS) waves followed by the growth of secondary instabilities. We investigate the effect of a smooth forward-facing step on the growth properties of TS waves excited by forcing the boundary layer at different unstable non-dimensional frequencies. Based on the second approach, Edelmann & Rist (2015) found that generally, for transonic flows, sharp forward-facing steps led to an enhanced amplification of disturbances They found subsonic and supersonic results showed significant differences in the generation mechanism of the separation bubbles. In order to validate the stabilising effect of the smooth forward-facing steps seen in the linear stability analysis, fully nonlinear DNS of both the K- and H-type transition scenarios are conducted These two transition scenarios are insightful because they exhibit a long region of linear growth suitable for the investigation of the effect of the forward-facing smooth step in the boundary layer on the TS wave (Sayadi, Hamman & Moin 2013).

Definitions correlated with a surface imperfection
Findings
Conclusions
Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.