Abstract
This work deals with fatigue testing of the EN S355 structural steel welded joint. The weld was manufactured by the MIG welding technology and as the filler material was used the G3Si1 wire. The fatigue tests were carried out in the rotating bending mode on the specimens manufactured from the welded joint of the S355 steel. The main aim was to evaluate the fatigue endurance of the weld material and for this reason were used machined axis symmetrical specimens to remove the notch effect of the weld shape. In order to increase the fatigue endurance of the weld, the Nd-YAG laser was used for laser shock peening (LSP) of specimens surfaces, which lead to removing of the weld defects but in overall caused that LSP has behaved as the notch and lead to decreasing of the fatigue endurance. Obtained results of fatigue tests are compared, discussed and supported by correlation with results of additional experiments, e.g. identification of incurred structures after the laser shock peening by the metallographic observations and micro-hardness tests.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.