Abstract

Although extensive research has been conducted in literature to investigate tunnelling effects on pipelines, the performance of existing jointed pipelines subjected to excessive tunnel movement has not been investigated. This study sets out to examine the effects of tunnel active instability on three-dimensional deformation patterns of existing pipelines using physical model tests. Tunnelling induced ground / pipeline settlement, joint rotation, and bending strain under various horizontal tunnel face movements are systematically explored. Results show that the tunnel face pressure at the active limit state is practically independent of tunnel cover to diameter ratio (C/D). Existing pipelines that fall within a range of 0.1 D ~ 0.5 D ahead of the tunnel face experience excessive settlements, significant bending strains and joint rotation. The measured peak settlement of pipelines at 0.3 D in front of the tunnel face exceeds the allowable limit, and the maximum settlements in the jointed pipeline are up to 2.67 times those observed in the continuous pipeline. Meanwhile, the joint rotation angle and settlement induced in the jointed pipeline are greatly affected by the C/D ratio and decrease by up to 55.5% and 22.0% with an increasing C/D ratio from 1.0 to 1.5.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.