Abstract
Abstract It is demonstrated for the first time that the gas sensing properties of a spinel ferrite complex metal oxide semiconductor can be improved by controlling iron stoichiometry. Conductivity and sensitivity was analyzed for ZnFe2+zO4± spinel type ferrite with z from −0.01 to 0.15. By increasing iron content from z = −0.01 to z = 0.1, sensitivity increases up to 3 times but for samples with z > 0.1 sensitivity drops. It was observed from impedance spectroscopy measurements that resistance decreases with an increase of the iron content. Complex impedance spectra reveal two phases with different resistance attributed to depletion layer (Rd) and bulk (Rb). With increasing iron content increases Rd/Rb ratio due to decrease of depletion layer width. Outer surface of the grain of the sensing material estimated higher ratio (Rd(air)/Rd(gas)) with gas exposure in comparison with bulk (Rb(air)/Rb(gas)). Overall sensitivity increases due to increase of donor concentration leading down to increase adsorbed oxygen species on grain surface. Sensitivity drops when z > 0.1 due to remarkable decrease of depletion layer width.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
