Abstract
In the present investigation, strips were produced by melt conditioned twin roll casting (MC-TRC) process. The strips were homogenized at 400C for one hour followed by hot rolling (400C) process. Severe deformation was applied to deform the strip up to 40% by single and two passes. Tensile tests at elevated temperature (200C) were conducted on TRC, MC-TRC, and hot rolled MC-TRC samples. Single pass hot rolled MC-TRC sample showed excellent tensile strength and ductility compared to the other samples. Detail microstructural studies revealed that fine grain structure can be obtained by giving maximum deformation during the hot rolling process and finer the grain size better is the tensile properties at warm forming temperature.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.