Influence of inherent anisotropy on the seismic behavior of liquefiable sandy level ground

Abstract

Inherent anisotropy is a crucial aspect to consider for an improved understanding of the strength and deformation characteristics of granular materials. It has been the focus of intense investigation since the mid-1960s. However, inherent anisotropy’s influence on ground seismic responses, such as liquefaction, has not been extensively studied. In this paper, inherent anisotropy’s influence on ground seismic responses is examined through a series of dynamic centrifuge model tests on liquefiable level sand deposits. During the model setup, five different deposition angles (0, 30, 45, 60, and 90 degrees) were achieved using a specially designed rigid container. The models were exposed to tapered sinusoidal input accelerations and the recorded results were fully investigated. It was found that deposition angle-caused inherent anisotropy significantly influenced the excess pore pressure responses during the shaking and dissipation phases. The amount of excess pore pressure build-up and the high excess pore pressure duration increased with the deposition angle, while the dissipation rate decreased as the deposition angle increased. The inherent anisotropy also influenced liquefaction-induced ground settlement, with volumetric strain increasing along with the deposition angle. With respect to response acceleration, inherent anisotropy’s effects depended on the amount of excess pore pressure build-up (i.e., degree of liquefaction). In view of these results, it was concluded that a sandy ground, deposited at a higher angle (i.e., closer to 90 degrees), is more susceptible to liquefaction and that inherent anisotropy’s influence should be considered when evaluating the liquefaction potential and performing effective stress analyses.