Influence of HTS tape arrangement on the transverse compression performance of copper former CORC cables

Abstract

Abstract CORC cables are subject to large transverse compression electromagnetic forces in fusion projects. Unfortunately, the electromagnetic force exceeding its critical transverse compression load will cause an irreversible decrease in its critical current. Therefore, it is particularly important to enhance the critical transverse compression load to ensure that the critical current does not decrease during operation. The winding method of HTS (High tempreture superconducting) tape on the central former is variable. So the experimental study on how to increase the critical transverse compression load of CORC cable by changing the winding method of HTS tape is carried out in this paper. Firstly, the influence law of parameters of the number of HTS tapes per layer and the number of HTS tape layers on their transverse compression performance are analysed independently. The results indicate that increasing the number of HTS tapes per layer and the number of HTS tape layers can both improve the transverse compression performance of CORC cables. Whereas, in the case of a cable with a certain critical current demand (the same total number of HTS tapes), increasing the number of HTS tape layers necessarily reduces the number of HTS tapes per layer. Therefore, in order to compare the degree of influence of the above two parameters, we conducted transverse compression experiments on multiple groups of CORC cables with different winding methods (more layers with few tapes per layer or few layers with more tapes per layer) under the same critical current demand. The results show that under the same critical current demand, choosing the winding method that reduces the number of HTS tape layers and increases the number HTS tapes per layer can effectively improve the transverse compression performance of CORC cables. A 3D multilayer CORC cable transverse compression finite element (FE) model is also established to explain the inherent reasons for the differences in transverse compression performance of CORC cables under different HTS tape winding methods.