Abstract
Abstract In this paper, a titanium diboride ceramic was produced by the hot pressing sintering method. The effects of hot pressing parameters on the TiB 2 ceramic microstructure and mechanical properties were studied. The bending strength and fracture toughness were measured by three point bending testing and single edge notched bending tests (SENB), respectively. The microstructure features of the TiB 2 sintered material were revealed by means of SEM and TEM. The results show that the TiB 2 grain size increases quickly with the increasing temperature and time during hot pressing sintering. The density and the TiB 2 grain size have a great influence on the mechanical properties. The bending strength decreases with increasing TiB 2 grain size, whilst the fracture toughness increases.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have