Influence of High-Strength, Low-Alloy Steel on Fatigue Life at a Non-Load-Bearing Transverse Welded Attachment

Abstract

<div>This study investigated the influence of high-strength low-alloy steel on the fatigue life of a load-bearing member with a non-load-bearing transverse welded attachment (T-joint). It compared high cycle fatigue data to two fatigue design codes, namely BS 7608 and Eurocode EN 1993-1-9. Different base and filler material combinations of varying material strengths were investigated, resulting in a total of three different specimen configurations. Two material combinations had a high-strength steel (Strenx<sup>®</sup> 700 MC D) for the base material, with one combination having a matched filler material and the other having an undermatched filler material. The third material combination had a lower-strength steel (S 355 JR AR) for the base material, with a matched filler material. Tensile tests were performed to confirm the base material mechanical properties and weld quality of the manufactured specimens. The investigation showed that there was no significant benefit to using high-strength steel as the base material for a fatigue loaded T-joint with a non-load-bearing welded attachments.</div>