Abstract
At high feed rates, the laser beam welding process is very efficient and stable, resulting in a high weld seam quality. However, at a certain feed rate, the weld seam begins to suffer from undercuts, and, when further increasing the feed rate in addition humping occurs. It is known that the increase of the feed rate leads to an elongation of the capillary opposite to the feed direction. This has a significant influence on the melt flow and therefore on the formation of undercuts and humps. In the present work, the geometry of the capillary was studied as a function of the feed rate by means of X-Ray imaging during welding. It was found that if a critical feed rate was exceeded, the capillary geometry switched from a U-shape to a wedge-shape. The wedge-shaped capillary was found to be directly related to the occurrence of undercuts. It was also found that the critical feed rate for the formation of a wedge-shaped capillary increases with the reduction of the laser beam diameter. Furthermore, a possibility to shift the critical feed rate to higher feed rates by the means of beam shaping is shown.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
