Abstract
Titanium dioxide represents an effective photocatalyst for water and air purification and for self-cleaning surfaces. The purpose of this study is to determine sound absorption property of polymer foam of high doping of Titanium Dioxide (TiO2) which are 20%, 40%, 60%, 80% and 100%. The acoustic study of the samples was measured by using impedance tube test according to the ASTM E-1050 to determined sound absorption coefficient (α) and noise reduction coefficient method (NRC). The highest α is 0.999 observed from the polymer foam doped with 60% of TiO2 at high frequency level of 4000 Hz. Meanwhile, the highest doping of TiO2 polymer foam shows remarkable characteristic of low level frequency absorption at 2000 Hz. Thus, different percentage of TiO2 doped in polymer foam can be used successfully to alter the characteristic of sound absorption property in a systematic way according to the request application.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.