Influence of Hblock Fine-Grained Material on Selected Parameters of Cement Slurry

Abstract

Fine-grained materials are used to seal the microstructure and improve the mechanical parameters of the formed cement sheath. They are used in cement slurries designed to seal casing columns at great depths and in geothermal boreholes to improve thermal conductivity. Such additions shorten the setting time and the transition time from the value of the initial time of the setting to the final of the setting. This allows the shortening of the time needed to bind the slurry and move on to further work. Additionally, it helps to eliminate the possibility of gaseous medium intrusion into the structure of the setting cement slurry. The goal of the work is to determine the influence of the Hblock fine-grained material on selected parameters of the cement slurry. Hblock is used in the research ranging from 1% to 20% (bwoc (bwoc—by weight of cement)), and the two types of cement most commonly used in the petroleum sector. Then the technological parameters of fresh and hardened cement slurries were tested. Research on rheological parameters, determined rheological models and flow curves are performed. On the basis of the obtained test results, the influence of the additive on the technological parameters of the cement slurry is discussed. The research results allow for further work and then the application of the fine-grained material in the petroleum sector.