Abstract
Hydrogen usually penetrates metals through defects such as dislocations, vacancies, and crystalline imperfections and causes embrittlement, leading to cleavage fracture and intergranular fracture. Synthetic natural gas produced by coal gasification, biogas, and landfill gas inevitably contain hydrogen. Therefore, hydrogen embrittlement of pipeline materials should be considered when they are mixed with conventional natural gas and supplied to customers. To analyze hydrogen embrittlement of base metals and girth weld metals of API 5L X70 and X65 gas pipelines, a specimen was treated in 100 % hydrogen environment at 10 MPa to determine the hydrogen concentration in it. Small punch (SP) tests were performed under various gaseous components and pressures. When SP tests were performed at very low speed, hydrogen embrittlement could be observed. Specimens became very susceptible to hydrogen embrittlement with increasing hydrogen partial pressure in the hydrogen/methane gas mixture, and the SP energy also decreased dramatically.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
