Abstract
In this study, the influence of friction stir processing process parameters (FSP), such as tool rotational speed, tool traverse speed, and the tool tilt angle on the mechanical properties of Sic reinforced surface magnesium rare earth ZE41 alloy composite was studied. The process was carried at tool rotational speeds of 710, 900, 1120, 1600, 1400 and 1800 rpm, tool traverse speeds of 16, 25, 40 and 63 mm/min and tool tilt angle of degree 1. Nano-particles of SiC (40 microns) were used as reinforcements to produce a composite surface. The grain refinement of the processed specimens was analyzed using scanning electron microscope. It is observed from the results that FSP process parameters influenced the surface composite area, SiC particles distribution and micro hardness of the composite. The outcomes indicated that the higher micro hardness was obtained at rotational speed of 1100 RPM, traverse speed 40mm/min and tilt angle 10.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: International Journal of Recent Technology and Engineering (IJRTE)
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
