Abstract
In view of the proliferating applications involving membrane-based separation, the inevitable membrane fouling phenomenon is well-studied. However, the influence of foulant shape on membrane fouling remained incompletely understood. Therefore, the goal of this study was to investigate the fouling behaviors by three different shapes of latex particles (namely, peanut, pear and sphere) with similar mean diameters in the range of 3.5–3.8 μm. External and internal fouling were studied using polycarbonate track-etched (PCTE) membranes with nominal pore sizes of 2 and 8 μm, respectively. Flux data were taken, and fouling models, optical coherence tomography (OCT) and field-emission scanning electron microscope were employed. Regarding external membrane fouling, the sphere-shaped particles displayed the worst flux decline, which is tied to the greatest tendency to deposit on the membrane pores, as revealed by the network fouling model. As for internal fouling, the flux decline curves were more similar among the particle types. The fouling model shows the sphere-shaped particles gave the densest internal cake, which caused slightly steeper flux decline in the latter part of the filtration. Furthermore, OCT indicates that the highest fouling fractions at 7.5 μm below the membrane were exhibited for the peanut-shaped particles, which is due to the preferential vertical orientation resulting in deeper penetration. Results here highlight the non-negligible influence of foulant particle shape, which warrants further understanding and accounting for membrane fouling studies. • Used OCT to reveal influence of foulant particle shape on membrane fouling. • Spheres were more prone to pore-blockage and thus gave worst flux decline. • Non-spherical particles gave less dense internal cakes due to rotational effects. • Peanut-shaped particles penetrated deeper due to preferential vertical orientation. • Particle shape affected flux decline more when external fouling was dominant.
Accepted Version (
Free)
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
