Abstract

This paper investigates the effects of fineness and replacement of fly ash on the fresh and hardened properties of recycled aggregate concrete. Two groups of recycled aggregate concretes were studied and compared with that of conventional concrete (CON) in which crushed limestone and local river sand were used as aggregates. The first group was prepared using 100% coarse recycled concrete aggregate and local river sand. For the second group, crushed limestone and local river sand were fully replaced by both coarse and fine recycled concrete aggregates. The results indicate that the slump loss of the recycled aggregate concrete with fly ash was reduced to lower than that of the recycled aggregate concrete without fly ash when the fineness of the fly ash was increased, which increased the slump loss of the fresh concrete. Fly ash can be used to increase the compressive strength of recycled aggregate concrete, depending on its fineness and the degree of fly ash replacement. The addition of fly ash with different fineness in recycled aggregate concrete had no significant effect on the splitting tensile strength and the modulus of elasticity of the recycled aggregate concrete, which are related to its compressive strength.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.