Abstract
The mechanical dewatering of activated sludge is troublesome due to its high compressibility of solids. The dewatering can be enhanced dramatically by the use of electroosmosis, in which an electric field is applied to the sludge cake. In this study, the influence of filter cloth on the cathode on the dewatering of activated sludge was investigated. It was found that thicker filter cloth led to lower water removal from the sludge cake, so a stainless steel cathode net with small pore size instead of filter cloth was applied, which improves the dewatering efficiency and reduces the electric power consumption. Moreover, water absorbent materials were helpful to remove the water from the sludge cake. For the electroosmotic dewatering at 7 kPa and 24 V·cm −1, the water content in the sludge cake decreased to 60% (by mass) with the average 0.075 kW·h·kg −1 of water removed by using the cathode net.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.