Abstract
In this paper results are reported of impact tests performed to study the influence of different fibre types on dynamic compressive properties of fibre reinforced concrete (FRC). FRC specimens are prepared with the same concrete and 1% of fibres of different types. The compressive impact tests are conducted with an instrumented drop weight impact system consisting of a hard steel drop weight, two 180t fast response loadcells, a high speed video camera, and a fast response data acquisition system. In this study, six fibre types with different shapes and material properties are considered. They are synthetic fibres, undulated, cold rolled, flattened, hooked end and a new spiral shape steel fibres. The dynamic stress-strain relationship is obtained by fitting the load history from the bottom loadcell to the average strain history captured by the strain gages. The energy absorption capabilities are defined as the area under the stress-strain curve of FRC specimens. The performance of the new spiral shape steel fibre is discussed by comparing the test results with those obtained from specimens reinforced with other types of fibres. The influence of the fibre shapes on the failure modes, ductility and energy absorbing capacity of FRC is discussed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
