Abstract
The influence of fiber volume fraction on the mode III interlaminar fracture toughness, G IIIC, of a glass/epoxy composite was examined using the edge-cracked torsion specimen. It was found that G IIIC corresponding to onset of crack propagation substantially increased with decreasing fiber volume fraction. The fracture surfaces of broken specimens were inspected in optical and scanning electron microscopes. The higher initiation fracture toughness for the low fiber volume fraction composite is attributed to the increased matrix volume allowing for increased plastic deformation energy dissipation in the matrix resin prior to macroscopic crack propagation. In addition to the primary delamination crack, both the low and high fiber volume fraction specimens displayed intralaminar matrix cracks in the 90° plies adjacent to the crack plane, and such cracks were particularly numerous in the low fiber volume fraction specimens which contribute to the resistance to crack propagation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
