Influence of fiber breakage on flow behavior in fiber length- and orientation-dependent injection molding simulations

Abstract

• Orientation dependent fiber breakage modeling approach • Fiber length and orientation dependent flow modeling • Coupling of transient fiber breakage modeling and fiber dependent viscosity and flow modeling Injection molding is one of the most important processes for manufacturing discontinuous fiber reinforced polymers (FRPs). The matrix of FRPs shows a transient chemo-thermomechanical behavior and the fibers create anisotropy influencing physical properties. Hence, FRPs are complex materials, but also likely used in volume production. In this work, the fiber-induced anisotropic behavior during mold filling is modelled with an anisotropic fourth order viscosity tensor. The viscosity tensor takes second and fourth order fiber orientation tensor, fiber length and non-Newtonian matrix viscosity into account. In this way, the macroscopic simulation captures the influence of the flow field on the fiber re-orientation and vice versa. The fiber orientation tensor is used to determine reference fibers in every element for calculation of hydrodynamic forces. This information is used in a novel fiber breakage model, based on buckling of fibers in Jeffery's orbit. The result is a macroscopic molding simulation with not only transient fiber orientation distribution, but also fiber length distribution. Due to the anisotropic viscosity tensor, the predicted fiber breakage influences the material's viscosity and flow behavior, which is also visible in the simulated cavity pressure. The results are validated with injection molding experiments, performed with a glass fiber reinforced phenolic compound, showing good agreement.