Abstract
Micellar-enhanced ultrafiltration (MEUF) is a promising technology developed for treating the wastewater containing metal ions or organic pollutants. One of the greatest problems in MEUF is membrane fouling which is mainly caused by concentration polarization, gel layer or cake formation caused by the deposition of surfactant micelles on the membrane surface and surfactant adsorption in the membrane interior. In this study, surfactant sodium dodecyl sulfate (SDS), which was used in membrane separation as colloidal particles, caused the flux decline. The transmembrane pressure (TMP) and feed concentration of SDS had significant influences on the flux. This paper presented that the lower TMP had a smaller effect on membrane fouling, and when SDS concentration was around the critical micelle concentration (CMC), lower permeate flux and higher additional membrane fouling resistance were obtained. The effects of three kinds of hydraulic flushing methods on membrane permeate flux were investigated, including periodic forward flushing, periodic backwashing and forward flushing followed by backwashing. It was found that when the periodic combined flushing interval was 10min, forward flushing and backwashing phase times were 150s and 90s, respectively, and that combined flushing was more conductive to permeate flux recovery in this study.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
