Abstract
To predict the effect of Fe2O3 on slag splashing properties in the nickel smelting converter, Factsage software was used to calculate the proportion of the liquid phase and the viscosity for MgO-FeO-Fe2O3-SiO2 melts, the melting temperature was measured using slag column deformation, and the microstructure was also observed. The results show that, when the content of Fe2O3 is increased from 13.79% to 24.14%, the liquid phase at 1250°C maintains a high proportion of 82.68% and the melting temperature is below 1200°C; The magnetite and hortonolite with high melting points are considerably increased, and the viscosity rises accordingly. The melting and viscous properties for the slag with high content of Fe2O3 were improved by adding MgO. Desired slag splashed layer was formed with the saturated Fe2O3 and MgO slag.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.