Influence of electrochemical reduction and oxidation processes on the decolourisation and degradation of C.I. Reactive Orange 4 solutions

Abstract

The electrochemical treatment of wastewaters from textile industry is a promising treatment technique for substances which are resistant to biodegradation. This paper presents the results of the electrochemical decolourisation and degradation of C.I. Reactive Orange 4 synthetic solutions (commercially known as Procion Orange MX2R). Electrolyses were carried out under galvanostatic conditions in a divided or undivided electrolytic cell. Therefore, oxidation, reduction or oxido-reduction experiences were tested. Ti/SnO 2–Sb–Pt and stainless steel electrodes were used as anode and cathode, respectively. Degradation of the dye was followed by TOC, total nitrogen, COD and BOD 5 analyses. TOC removal after an oxidation process was higher than after oxido-reduction while COD removal after this last process was about 90%. Besides, the biodegradability of final samples after oxido-reduction process was studied and an improvement was observed. UV–Visible spectra revealed the presence of aromatic structures in solution when an electro-reduction was carried out while oxido-reduction process degraded both azo group and aromatic structures. HPLC analyses indicated the presence of a main intermediate after the reduction process with a chemical structure closely similar to 2-amine-1, 5-naphthalenedisulfonic acid. The lowest decolourisation rate corresponded to electrochemical oxidation. In these experiences a higher number of intermediates were generated as HPLC analysis demonstrated. The decolourisation process for the three electrochemical processes studied presented a pseudo-first order kinetics.