Abstract
The microstructural features and tensile creep behavior of Al2O3 doped with Nd2O3 at levels ranging from 100 to 1000 ppm (Nd:Al atomic ratio) were systematically investigated. Compositional mapping, using both high‐resolution scanning transmission electron microscopy and secondary ion mass spectroscopy revealed that, for all of the compositions studied, the Nd3+ ions were strongly segregated to the Al2O3 grain boundaries. Microstructural observations revealed that the solubility of Nd2O3 was between 100 and 350 ppm. Tensile creep tests were conducted over a range of temperatures (1200°–1350°C) and stresses (20–75 MPa). Both the stress and grain‐size exponents were analyzed. In selected experiments, controlled grain‐growth anneals were used to enable creep testing of samples of the same average grain size but different neodymium concentrations. Independent of dopant level, the neodymium additions decreased the creep rate by 2–3 orders of magnitude, compared with that of undoped Al2O3. The value of the apparent creep activation energy increased with increased dopant concentration and then saturated at dopant levels exceeding the solubility limit. Overall, the results of the present study were consistent with a creep‐inhibition mechanism whereby oversized segregant ions reduce grain‐boundary diffusivity by a site‐blocking mechanism.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
