Influence of different loads on PCDD/F removal by SCR during municipal solid waste incineration

Abstract

This study was conducted on a full-scale (500 t/d) municipal solid waste incinerator (MSWI), investigating the influence of different loads on the emission of polychlorinated dibenzodioxins and polychlorinated dibenzofurans (PCDD/Fs) and their removal by selective catalytic reduction (SCR) system. The total concentration of PCDD/Fs at the SCR inlet under 100% load was higher than that under 80% load. The changing loads caused different distribution characteristics of PCDD/Fs at the SCR inlet, and the dominant congeners changed from high-chlorinated PCDDs (80% load) to low-chlorinated PCDFs (100% load). Moreover, the increased load enhanced the removal efficiency of PCDD/Fs by SCR from 17.3% to 64.2%, which was influenced by the inlet PCDD/F distribution and the moisture content. The high-chlorinated PCDD/Fs with the more stable structure were more difficult to be deteriorated and the high moisture content can weaken the catalytic activity of SCR catalysts. Correlation analysis was used to study the relationship between major air pollutants and PCDD/F emissions. The results showed that HCl positively correlated with PCDD/F emission concentrations, while NOx and SO2 negatively correlated. The results of this study can provide a reference for MSWI to operate properly under variable loads.