Influence of curved thin-film device on deformation of a solar sail

Abstract

A spinning solar sail IKAROS’s membrane is estimated to unexpectedly deform into an inverted pyramid shape due to thin-film devices with curvature, such as thin-film solar cells and steering devices on the membrane. It is important to investigate the deformation caused by the curved thin-film devices and predict the sail shape because the out-of-plane deformation greatly affects solar radiation pressure (SRP) and SRP torque. The purpose of this paper is to clarify the relationship between the global shape and orientation and position of curved thin-film devices and to evaluate SRP torque on the global shape using finite element analysis. The global shape is evaluated based on the out-of-plane displacement and the SRP torque. When the curved thin-film devices make the membrane shrink in the circumferential, diagonal, and radial direction, the sail deforms into a pyramid shape, an inverted pyramid one, and a saddle one, respectively. The saddle shape is more desirable for solar sails than the inverted pyramid shape and the pyramid one from the viewpoint of shape stability to SRP and control of SRP torque in the normal direction of the sail (windmill torque). The position of the thin-film device tends to increase the absolute value of windmill torque when it is biased circumferentially from the petal central axis. The suggested design principles for the arrangement of thin-film devices is that the curved thin-film devices should be directed so that the sail shrinks in the radial direction in order to deform the sail into a saddle shape with high shape stability, and the position of the thin-film devices should be biased in the circumferential direction paying attention to the absolute value of windmill torque to determine the direction of windmill torque.