Influence of curvature geometry of laminated FRP composite panels on delamination damage in adhesively bonded lap shear joints

Abstract

Three dimensional non-linear finite element analyses of Lap Shear Joints (LSJs) made with curved laminated FRP composite panels having pre-existing delaminations between the first and second plies of the strap adherend have been carried out using contact and Multi-Point Constraint elements (MPC). Progressive growth of delamination has been simulated by sequential release of the MPC elements. Strain Energy Release Rate (SERR), being an indicative parameter has been computed using Virtual Crack Closure Technique (VCCT) for assessing the growth and propagation of the delamination damage fronts. The inter-laminar stresses and the SERRs at the two fronts of the pre-embedded delamination are found to be significantly influenced by the delamination size. The three individual modes of SERR on the two delamination fronts are found to be much different from each other, indicating dissimilar rates of propagation. The curvature geometry of adherends significantly influences the SERR values. It is seen that decrease of radius of curvature of adherend panels, keeping their widths unchanged, increases the SERR values. Flatter FRP composite adherends have superior resistance to delamination damage propagation as compared to LSJs made with curved composite laminated panels.