Abstract
Objectives The purpose of this study was to investigate the effect of light-curing protocol on degree of conversion (DC), volume contraction ( C), elastic modulus ( E), and glass transition temperature ( T g) as measured on a model polymer. It was a further aim to correlate the measured values with each other. Methods Different light-curing protocols were used in order to investigate the influence of energy density (ED), power density (PD), and mode of cure on the properties. The modes of cure were continuous, pulse-delay, and stepped irradiation. DC was measured by Raman micro-spectroscopy. C was determined by pycnometry and a density column. E was measured by a dynamic mechanical analyzer (DMA), and T g was measured by differential scanning calorimetry (DSC). Data were submitted to two- and three-way ANOVA, and linear regression analyses. Results ED, PD, and mode of cure influenced DC, C, E, and T g of the polymer. A significant positive correlation was found between ED and DC ( r = 0.58), ED and E ( r = 0.51), and ED and T g ( r = 0.44). Taken together, ED and PD were significantly related to DC and E. The regression coefficient was positive for ED and negative for PD. Significant positive correlations were detected between DC and C ( r = 0.54), DC and E ( r = 0.61), and DC and T g ( r = 0.53). Comparisons between continuous and pulse-delay modes of cure showed significant influence of mode of cure: pulse-delay curing resulted in decreased DC, decreased C, and decreased T g. Influence of mode of cure, when comparing continuous and step modes of cure, was more ambiguous. Significance A complex relationship exists between curing protocol, microstructure of the resin and the investigated properties. The overall performance of a composite is thus indirectly affected by the curing protocol adopted, and the desired reduction of C may be in fact a consequence of the decrease in DC.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
