Influence of Cold Plastic Deformation on the Development of the Texture in High-Manganese Austenitic Steel

Abstract

The research was carried out on 26Mn-3Si-3Al steel having a low value of SFE. After casting, steel was forged and hot-rolled at the temperatures within the range of from 1200°C to 900. Next, the steel was cold rolled until the deformation of 66% was obtained. Upon the basis of X-ray examination and the observations of microstructures, it was found out that during cold rolling mechanical twinning and the martensitic transformation of austenite in hcp-ε martensite occurred. The crystallographic texture of the γ phase (austenite) and ε phase (martensite) was also examined.