Abstract
Results of nonlinear finite element analyses of slender unreinforced masonry (URM) hollow walls under eccentric vertical load and with different cavity depths are presented, with emphasis on critical axial loads. The walls were analyzed using a nonlinear finite element formulation that was verified with published results from experiments on slender URM walls. The analysis indicates that for small amounts of bending from eccentricity, critical load decreases as cavity depth increases; while for moderate or large amounts of bending, there exists a nontrivial optimal cavity depth that maximizes the critical load. In some cases, critical load for a hollow wall is larger than that for a similar solid wall. In comparing the analysis results with code provisions for URM stability in the United States of America (USA), the treatment of eccentricity in hollow masonry sections was found to be adequate. However, code provisions cannot be used to simulate the observed reductions in bucking loads associated with compression softening from material plasticity. Moreover, commonly-used effective height factors from elastic stability theory can lead to overestimation of critical axial loads. Further study of these issues is needed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.