Abstract
The influence of reinforcement of carbon nanotubes (CNTs) on microstructural features and mechanical properties of thermally sprayed Al2O3–3[Formula: see text]wt.%TiO2and WC–20[Formula: see text]wt.%Co coatings was investigated. Alumina–Titania coatings were deposited by Air Plasma Spraying (APS) and Tungsten Carbide–Cobalt coatings were deposited by High-Velocity Oxy-Fuel (HVOF) spraying process. The coatings obtained with reinforcement of CNTs were characterized to interpret the microstructural changes and also to evaluate the variation in their mechanical properties. The percentage composition of CNTs in both APS and HVOF coatings systems were varied in the order of 2, 4, and 6[Formula: see text]wt.%. It has been found that homogenous dispersion of carbon nanotubes in the coating systems results in increased microhardness and reduced surface roughness. Also, the microstructural features of the coating systems clearly showed that the coatings are denser with fewer pores due to the presence of CNTs.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
